|
How to build a pretty simple Hovercraft.
Here are some directions on how I built my homemade hovercraft.
|
CLICK HERE TO SEE THE LATEST HOVERCRAFT PROJECT!
|
FOR SALE
Scat Hovercraft 12' Three seater.
Rebuilt Rotax 503 dual carb.Electric Start.
All new throttle cables.
New stator, flywheel, CDI, External coil, Wires.
All wiring redone. All new switches.
Hull was painted and there are chips and some minor scratches.
Bags are in great shape.
I would like to sell quick and get back to the Hoverstar Project.
Contact me at:
|
|
Supplies
1-piece of 3/8 plywood. This was the thinnest I could get. If you can find something thinner or lighter use it.
Some 2x3's
Some Marine grade vinyl for the skirt. I got this at a local fabric store for under $20.00.
A seat. I used a milk crate.
Chicken wire. Home depot. 1/4" holes.
Two small engines:
For the lift I used my backpack leaf blower. As is unmodified. I just took the tube off.
For propulsion I used a 2-cycle snowblower engine. I think it's about 2.5 H.P.
A model airplane prop. I got it off Ebay for $12.00 with shipping. It's 22" with 10 pitch. You will have to experiment with this. You want your engine to run at full RPM at full throttle. If the engine is running too fast you want a higher pitch or longer prop. If the RPM's are too low you need a lower pitch or shorter prop.
Some misc. hardware
You can click on any image to make it larger.
|